   |
 |
3 HP 6 Gallon Portable Pancake Air Compressor
Standard non-detergent 30 weight compressor or motor oil
120 volt, 14amp, 1600 watts, 60HZ
Maximum pressure disconnect safety valve prevents over-pressure delivery
3 Prong Grounded
Actual Height without handle: 20'' X 16''
Double Insulated
Includes pressure switch on @ 85 PSI
4.2 CFM @ 90PSI
5.2 CFM @ 40PSI
Max. PSI 120
Air Outlet Size: 1/4''
|
| Part Number: 03941 | Selling Price: $89.97 |
 |
Magnum Air 4-HP 15-Gallon Upright Air Compressor
This Magnum Air 4HP air compressor is an affordable and portable air supply for powering nailers, general shop clean-up, airing tires and inflating sports equipment.
115V, 60Hz, Single Phase, 2850 RPM
4 HP, 15 Gallon
4.3 CFM @ 40 PSI
3.3 CFM @ 90 PSI
Portable
|
| Part Number: 01670 | Selling Price: $197.50 |
 |
60 Gallon Vertical Air Compressor
125 PSI
Twin Cylinder
Oil Lubricated
Belt Driven
220 V Motor
14.7 CFM @ 90 PSI
|
| Part Number: 03322 | CLEARANCE Selling Price: $375 |
 |
Pneumatic Utility Cut-Off Tool
Cuts through sheet metal, mufflers or steel rods. Great for Body Shops and Sheet Metal Shops. Uses 3'' cutting wheel.
Air inlet: 1/4 npt
Safety guard and hand trigger for easy speed control
Tool lenght: 6 3/4''
Operating pressure of 90 PSI required
Hose size: 3/8'' I.D.
Air consumption 4 SCFM
Includes external independent power regulator
Clear plastic shield for protection
No load speed of 20,000 RPM
|
| Part Number: 02023 | Selling Price: $15.97 |
 |
3/8 Inch Drive Square Drive Air Ratchet Tool
Air Pressure: 90 P.S.I.
Connector not included
Speed: 150 RPM
Drive: 3/8''
Hose size: 3/8 inch I.D.
Air Inlet: 1/4'' N.P.T.
Bolt Capacity: 3/8''
Length: 10''
Torque: 50 ft./lbs.
Average air consumption: 4 S.C.F.M.
|
| Part Number: 02039 | CLEARANCE Selling Price: $13.50 |
 |
13pc Air Tool Set
This full size Speedway Series 1/2'' Impact Wrench delivers 8000 RPM and 400 FT LBS Torque, 3/8'' ratchet wrench at 150 RPMS MAX torque of 90 PSI with 50FT lbs.
7- 1/2'' Drive CR-V Sockets: 3/8'', 7/16'', 1/2'', 9/16'', 5/8'', 11/16'', 3/4''
Contents:
1- Oil Pot
1- 1/2'' Drive Air Impact Wrench
1- 3/8'' Drive Air Ratchet Wrench
1- 1/4'' NPT Male Connector
1- In-Line Oiler
1- 3/8'' (F)- 1/2'' (M) Socket Adapter
Includes Storage Case
|
| Part Number: 02724 | Selling Price: $54.50 |
 |
17 Pc. Stainless Steel / Air Compressor Kit
Multiply your air compressor application possibilities with this HDC 17-piece accessory kit and youll be inflating tires blowing dust, connecting to hose lines attached to nailers, and more!
|
| Part Number: 02725 | Selling Price: $8.50 |
 |
41 Pc Air Tool and Accessories Set with Blow Gun
This Magnum Air 41 pc. air tool kit includes 3 tools and an accessory kit! The short barrel air hammer - easily cuts rusty bolts and metal panels, cut-off tool - cuts through 1'' diameter steel rods. The air die grinder - grinds, deburs and re-shapes. 3 Wrenches
1 Allen wrench
5 Blow gun accessories
5 Assorted grinding wheels
5 Male 1/4'' plugs
1 Roll of thread seal tape
1 Bottle of air tool oil
1 Short barrel air hammer
2 Chisel springs
Short barrel air hammer - easily cuts rusty bolts and metal panels - BPM: 5000 - SCFM: 6.0 Avg @ 90 PSI
4 Chisel bits
1 Storage case
1 Tire chuck
1 Female 1/4'' Coupler
1 Cutoff tool
1 Die grinder
1 Blow gun
7 Cut-off discs
Air-powered cut-off tool - cuts through 1'' diameter steel rods - RPM: 20000 - SCFM: 11.5 Avg. @ 90 PSI
Air die grinder - grinds, deburrs and re-shapes - RPM: 2500 - SCFM: 6.0AVG @ 90 PSI
|
| Part Number: 02787 | Selling Price: $53.50 |
 |
Air 1/2 Inch Drive Air Impact Wrench Tool
Maximum speed: 100 RPM
Twin-hammer impact mechanism
Average air consumption: 4.2 CFM
Drive: 1/2''
Standard bolt capacity: 9/16''
Impacts: 8000 BPM
Air Inlet: 1/4'' NPT
Torque range: 25-300 Ft.Lbs.
Maximum torque: 425 Ft. Lbs.
Overall Length: 7-1/4''
|
| Part Number: 02806 | CLEARANCE Selling Price: $32.50 |
 |
16 Gauge Capacity Air Nibbler Metal Cutter
Capacity 16 guage
Required pressure 90PSI
Average air consumption: 17.5 CFM @ 90PSI
Air inlet 1/4'' NPT
Recommended hose size: 3/8''
|
| Part Number: 02810 | CLEARANCE Selling Price: $15 |
 |
Air Shear
This Magnum Air pistol grip air shear cuts: plastic, tin, aluminum outline and shear and other metals up to 18-Gauge.
Capacity: 18 gauge
PSI: 90
Air inlet: 1/4''
Hose size: 3/8''
CFM: 4
Width of cut: 7/31''
SPM: 2600
|
| Part Number: 02817 | Selling Price: $32.97 |
 |
50FT x 3/8 Air Compressor Hose
Solid brass 1/4'' NPT male fittings
300 PSI max working pressure
Designed for all-weather use
Made in the USA.
|
| Part Number: 04003 | Selling Price: $15.97 |
|
15pc. Spray Gun Set
High pressure spray gun provides professional results for a variety of painting applications!
Touch-up gun for small jobs and detail work.
1 pint touch up spray gun - universal trigger, non bleed type, 1.5 SCFM at 40 PSI (100% usage)
5 quick connector attachments
5 dust masks
Blow mold carrying case
1 quart automotive spray gun - non bleeder type, adaptable to paint tank, 9.3 SCFM at 40 PSI (100% usage)
2 Drip free siphon cups
|
|
| Part Number: 01365 | CLEARANCE Selling Price: $23.97 |
